Description

Product Specifications Form of Chemical: Liquid Brand: Dr Fixit Usage/Application: Construction Packaging Size: 1 L Category: Waterproofing Coating Coverage: 40 Sq. ft Per Ltr. Color: Milky White Purity: 99% Grade Standard: Analytical Grade Specific Gravity: 1.01 pH Value: 7.7 Shelf Life: 18 months Storage Condition: Cool & Dry Place Model No: 301 Pidicrete URP Product Brochure: View Now Product Description Dr. Fixit Pidicrete URP is based on modified styrene butadiene latex supplied as a ready-to-use bonding agent in liquid consistency. It is used for repair of spalled concrete floors, columns, beams, chhajas, slabs & waterproofing of toilets & bathrooms, small terraces etc. as it bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance. Standard Compliance / Specification Meets the requirements of BS 6319 Part 2:1983 & ASTM C 190-85 standards. Areas of Application For concrete repairs Spalled concrete of floors Columns Beams Chhajas Slabs Parapets etc. For waterproofing Small roof terraces Sunken portions of toilets & bathrooms Chhajja & lift pits Balconies As a bond coat For bonding old concrete to old concrete, masonry stone work, plastering. For cladding Fixing or re-fixing of slip bricks, tiles, stones & marble bedding. As external rendering Weatherproof & frost resistant render. As bonding slurry coat For pinhole treatment on concrete surface. Features & Benefits Multi-purpose & economical product Easy to use Improves cracking resistance Improves hardness & prevents dust generation Reduces drying & aging shrinkage cracks Strong bonding to concrete, masonry & stonework Improves erosion resistance & prevents corrosion Improves abrasion resistance of cement mix Reduces viscosity of cement injection grout for better fluidity & bonding Method of Application Surface Preparation Clean the surface with wire brush or scrubber to remove hidden dirt, loose particles, laitance & dust. Degrease the surface using suitable solvents. Repair damaged concrete portion by saw cutting the extreme edges of repair location to a depth of at least 10 mm to avoid feather edging & provide strong bond. Clean the concrete surface to remove contamination where breaking is not possible. Roughen the surface by light scrabbling or grit blasting. For priming of concrete substrate The surface should be thoroughly saturated with potable water. Remove any excess water before application. Waterproofing Coating For waterproofing coating mix URP: Cement in ratio 1:1.5 by volume Mix for 2-3 minutes to avoid air entrapment. Keep adding cement to Dr. Fixit Pidicrete URP until the required consistency is achieved. Brush apply 2 coats of the mix in a span of 4-6 hours on the prepared concrete substrate. Overlay the coating with a protective screed to the desired slope & thickness. Bonding Primer For a bonding primer coat of Dr. Fixit Pidicrete URP mix IAP: Cement in ratio 1:1 by volume Brush apply 1 continuous coat of the mix on the prepared concrete substrate. Ensure to overlay the repair mortar when the bond coat is still tacky. Repair Mortars & Renders A suitable mix ratio for patching repair mortar or render is as follows: Mix design: Portland Cement: 50 kg Washed Sand: 150 kg Dr. Fixit Pidicrete URP: 5 kg